Korg TRITON Musical Instrument User Manual page 69

Add a new solo track to the song:
6. First, take the sequencer out of Multi-record status: Press the Preference tab, then press to un -check
the Multi REC checkbox. Press the Prog. 9-16 tab - you'll record a new track using Track 9).
7. Press to highlight the Track01 field (below the song name field). Press 9 on the Numeric keys, then
press the ENTER key to select Track09.
8. Press the Category box in Track 9's column (left), then press the 05 Brass tab to the left of the center
menu.
9. Select Program A009 Fat Brass from the center menu, then press OK.
Assign an Insert effect to the track:
10. Press the MENU key, then press P7: Insert Effect.
11. Press the Routing 9 -16 tab, then press Track 9's BUS Select
from the popup menu. Play the keyboard to hear the Program and assigned Insert Effect.
12. Press the EXIT key to return to the P0: Play / REC page.
13. Press START/STOP to playback the song, and rehearse the new Brass track. Stop playback when
you've got the new part ready to record and...
14. Press LOCATE to reset to measure 1, then press REC/WRITE, and START/STOP - after 2 bars of pre-
count - Record a burnin' Brass Track (You can do it) !!! When finished, press START/STOP, then
playback your new song!
Tip:
Is there more to learn about TRITON's sequencer? You better believe it! What we've shown you in the
Sequencer Mode section of this guide will get you started with your composing, but we've only just begun
(Karen?) to open your mind to TRITON's incredible sequencer! There's a virtual plethora of information in
the TRITON Owner manuals - covering linear, pattern, step, and loop recording, event editing - everything
you need and want from a world -class sequencer like TRITON's!
L/R popup button, and select IFX2
67
TRITON Training Guide