Midi Tracks - Korg OASYS musical instruments Operation Manual

Creating songs (Sequencer mode)
Resample SEQ Play: Make settings so that you can
resample your keyboard playing in Sequencer
mode.
In-Track Sampling: Make settings to sample only
an external audio signal using the In-Track
Sampling function.
Bounce All Tracks To Disk: This command resamples
all tracks in the song to a single WAVE file (stereo). For
more information, see "Bounce All Tracks To Disk" on
page 534 of the Parameter Guide.
Set Song Length: This command changes the length of
the specified song. When it is executed, the length of
the master track will change, and the number of
measures played will change. For more information,
see "Set Song Length" on page 541 of the Parameter
Guide.

MIDI Tracks

Tracks
MIDI Step Recording: It allows you to specify the
length and velocity of each note numerically, and to
input MIDI data, the pitches, from the keyboard. You
can use the Rest button and Tie button to enter a rest or
tie. For more information, see "MIDI Step Recording"
on page 535 of the Parameter Guide.
MIDI Event Edit: Here you can edit individual events
of MIDI data. For more information, see "MIDI Event
Edit" on page 536 of the Parameter Guide.
Bounce Track: This command combines the musical
data of the bounce source and bounce destination
tracks, and places the combined data in the bounce
destination. All musical data in the bounce source will
be erased. For more information, see "Bounce Track"
on page 542 of the Parameter Guide.
Create Control Data: This command creates control
change, aftertouch, pitch bend, or tempo data in the
specified region of a MIDI track or the master track.
For more information, see "Create Control Data" on
page 547 of the Parameter Guide.
Erase Control Data: This command erases data such as
control changes, after touch, pitch bend, or tempo in
the specified range. For more information, see "Erase
Control Data" on page 547 of the Parameter Guide.
Quantize: This command corrects the timing of MIDI
data of the type you specify (note data, control change,
aftertouch, pitch bend, program change, etc.) in the
track. For more information, see "Quantize" on
page 548 of the Parameter Guide.
Shift/Erase Note: This command shifts (moves) or
erases the specified note numbers in a specified MIDI
track and range of measures. For more information, see
"Shift/Erase Note" on page 549 of the Parameter
Guide.
Modify Velocity: This command modifies the velocity
values of notes in the specified area so that they will
change over time according to a selected curve. For
more information, see "Modify Velocity" on page 549
of the Parameter Guide.
110
Pattern
Step Recording (Loop Type): Here you can perform
step recording into a pattern. For more information,
see "Step Recording (Loop Type)" on page 554 of the
Parameter Guide.
Event Edit: Here you can edit individual events of the
musical data in a pattern. For more information, see
"Event Edit" on page 554 of the Parameter Guide.
Pattern Parameter: This command specifies the
number of measures and the time signature of the
selected pattern. For more information, see "Pattern
Parameter" on page 554 of the Parameter Guide.
Erase Pattern: This command erases the data from the
selected pattern. For more information, see "Erase
Pattern" on page 554 of the Parameter Guide.
Copy Pattern: This command copies the settings and
musical data of the selected pattern to another pattern.
For more information, see "Copy Pattern" on page 554
of the Parameter Guide.
Bounce Pattern: This command combines the musical
data of the bounce source pattern and bounce
destination pattern, and places the combined musical
data in the bounce destination. For more information,
see "Bounce Pattern" on page 555 of the Parameter
Guide.
Get From MIDI Track: This command takes musical
data from a MIDI track and loads it into the specified
pattern. For more information, see "Get From MIDI
Track" on page 555 of the Parameter Guide.
Put To MIDI Track: This command places a pattern
into a MIDI track. For more information, see "Put To
MIDI Track" on page 555 of the Parameter Guide.
Copy To MIDI Track: This command copies the
specified area of musical data from the specified
pattern to a MIDI track as musical data. For more
information, see "Copy To MIDI Track" on page 556 of
the Parameter Guide.
Common to MIDI tracks and audio tracks
Erase Track: This command erases the data from the
specified track. It is not possible to erase the master
track by itself. For more information, see "Erase Track"
on page 541 of the Parameter Guide.
Copy Track: This command copies musical data from
the copy source track to the specified track. For more
information, see "Copy Track" on page 542 of the
Parameter Guide.
Erase Measure: This command erases the specified
type(s) of musical data from the specified range of
measures. The Erase Measure command can also be
used to remove only a specific type of data. Unlike the
Delete Measure command, executing the Erase
Measure command does not cause the subsequent
measures of musical data to be moved forward. For
more information, see "Erase Measure" on page 542 of
the Parameter Guide.
Delete Measure: This command deletes the specified
measures. When the Delete Measure command is
executed, the musical data following the deleted