Song Editing; Song; Tracks - Korg KROSS Operation Manual

Hide thumbs Also See for KROSS:
Table of Contents

Advertisement

Song editing

You can apply a variety of editing procedures to a song. The
available types of editing procedures are listed below.

Song

Load (Save) Template Song: Loads a song template into
the song (or saves a song as a template). (see page 55)
Copy From Combination/Copy From Program: Copies
the settings of the specified combination/program to the
settings of the song that's currently selected.
Copy From Song: This command copies all of the settings
and musical data from the specified song to the song that's
currently selected.
Rename song: Renames the selected song. You can enter up
to 24 characters.
Delete Song: This command deletes the currently selected
song.
FF/REW Speed: This allows you to set the speed at which
fast-forward or rewind will occur when you press the FF
(
) button or REW (
) button.
GM Initialize: This command transmits a GM System On
message to the Sequencer mode, resetting all MIDI tracks to
the GM settings.
Set Song Length: This command changes the length of the
specified song.

Tracks

Event Edit: Here you can edit individual events of MIDI
data.
Erase Track: This command erases the data from the
specified track.
Copy/Bounce Track: The Copy Track command copies
musical data from the copy source track to the specified
track. The Bounce Track command combines the musical
data of the bounce source and bounce destination tracks, and
places the combined data in the bounce destination. All
musical data in the bounce source will be erased.
Erase Measure: This command erases the specified type(s)
of musical data from the specified range of measures. The
Erase Measure command can also be used to remove only a
specific type of data. Unlike the Delete Measure command,
executing the Erase Measure command does not cause the
subsequent measures of musical data to be moved forward.
Delete Measure: This command deletes the specified
measures. When the Delete Measure command is executed,
the musical data following the deleted measures will be
moved towards the beginning of the sequence.
Insert Measure: This command inserts the specified
number of measures into the specified track. When you
execute the Insert Measure command, the musical data
following the insert location will be moved backward.
Repeat Measure: This command repeatedly inserts the
specified measures for the specified number of times. When
you execute the Repeat Measure command, the measures
will be inserted following the measure specified by To End
of Measure, and musical data following the inserted data
will be moved backward.
Copy Measure: This command copies the measures of
musical data specified as the "From" source to the beginning
of the measure specified as the "To" location. When you
execute the Copy Measure command, the existing track data
at the copy destination will be rewritten.
Move Measure: This command moves the specified
measures of performance data to another measure. When
you execute the Move Measure command, the performance
data following the move-source measures will move forward
by the corresponding number of measures, and the
performance data following the move-destination will move
backward (i.e., later in the song) by the same number of
measures.
Create/Erase Control: The Create Control command
creates control change, aftertouch, pitch bend, or tempo data
in the specified region of a MIDI track or the tempo track.
The Erase Control command erases data such as control
changes, aftertouch, pitch bend, or tempo in the specified
range.
Quantize: This command corrects the timing of MIDI data
of the type you specify (note data, control change,
aftertouch, pitch bend, program change, etc.) in the
track.You can also adjust for swing.
Shift/Erase Note: This command shifts (moves) or erases
the specified note numbers in a specified MIDI track and
range of measures.
Modify Velocity: This command modifies the velocity
values of notes in the specified area so that they will change
over time according to a selected curve.
Rename Track: This command renames the selected track.
You can enter up to 24 characters.
Song editing Song
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kross-61Kross-88

Table of Contents