Caller Id Notification - Docomo SO-02D Instruction Manual

Putting the current call on hold and
answering an incoming call
When you hear the beep during a
1
call, tap [Answer].
The first call is put automatically on
hold and the incoming call is received.
- The terminal does not support
Conference call.
- Tap [Busy] to connect the incoming
call to the Voice Mail service center.
Activating Voice Mail service is
required beforehand.
Switch to the first call.
2
To end the later call, tap [End call].
The later call is terminated and switched
to the first call.
To put the later call on hold, tap [Switch
to this call].
The later call is put on hold and
switched to the first call. Tapping
[Switch to this call] switches the party.
Ending the current call and
answering an incoming call
When you hear the beep during a
1
call, tap [End current call and
answer].
The first call is terminated and the
incoming call is received.
Putting the current call on hold and
making a call to another party
During a call, tap
1
(Dialpad).
Enter the other party's phone
2
number, then tap
The first call is automatically on hold
and switched to the new call you made.
You can also search for a party by
tapping (Phonebook).
Switch to the first call.
3
To terminate the new call, tap [End call].
The new call is terminated and switched
to the first call.
To put the new call on hold, tap [Switch
to this call].
The new call is put on hold and
switched to the first call. Tapping
[Switch to this call] switches the party.

Caller ID Notification

When making a call, your phone number can
be shown in the display of the recipient's
phone you are calling. The caller ID is
important personal information. Carefully
decide whether you notify a recipient of your
caller ID.
Calling/Network Services
(Phonebook)/
.
89