Docomo SO-02D Instruction Manual page 105

Advanced Wi-Fi settings
You need to turn on the Wi-Fi setting
beforehand. (P.101)
Connecting to Wi-Fi network using a
WPS device
WPS is a function that enables you to simply
make complicated settings for wireless LAN
connection and security. WPS function in the
terminal enables you to connect to Wi-Fi
network using a WPS compatible wireless
LAN device as an access point. Make setting
for the WPS device as required.
From the Settings screen (P.95),
1
tap [Wireless & networks]
settings].
Tap [Auto setup (WPS)].
2
Press the WPS button of the WPS
3
device that functions as an access
point within 120 seconds.
Press the WPS button according to the
settings of the WPS device.
Adding a Wi-Fi network manually
From the Settings screen (P.95),
1
tap [Wireless & networks]
settings].
Tap [Add Wi-Fi network].
2
Enter [Network SSID] name of the
3
Wi-Fi network you want to add.
Tap [Security] field, then mark a
4
radio button of security type for
the Wi-Fi network you want to add.
If required, enter security
5
information for the Wi-Fi network
you want to add.
Tap [Save].
6
Viewing detailed information on a
connected Wi-Fi network
u
[Wi-Fi From the Settings screen (P.95),
1
tap [Wireless & networks]
settings].
Tap the Wi-Fi network that you are
2
currently connected to.
❖ Information
From the Settings screen (P.95), tap [Wireless &
networks]
[Advanced] to check "MAC address" and "IP address".
u
[Wi-Fi
4 options, "Open", "WEP", "WPA/WPA2
PSK", or "802.1x EAP", appear.
The detailed network information is
displayed.
u
[Wi-Fi settings] and tap
u
[Wi-Fi
t
and
Settings
103