Erasing A Motion Sequence For A Part Or Effect - Korg ESX-1 Owner's Manual

Music production sampler
Hide thumbs Also See for ESX-1:
Table of Contents

Advertisement

6. Turn the dial to edit the parameter value at that step. If you select
"Disabl," the motion sequence value will not be updated at that step.
MOTION DEST
Fx1Ed1(FX1 EDIT1)
Fx1Ed2(FX1 EDIT2)
Fx2Ed1(FX2 EDIT1)
Fx2Ed2(FX2 EDIT2)
Fx3Ed1(FX3 EDIT1)
Fx3Ed2(FX3 EDIT2)
Pitch/Glide(PITCH/GLIDE*)
EGTime(EG TIME)
Pan(PAN)
Level(LEVEL)
SttPoint(START POINT)
AmpEG(AMP EG)
Roll(ROLL)
Revers(REVERSE)
FxSend(FX SEND)
FxSel(FX SELECT)
ModSpd(SPEED)
ModDpt(DEPTH)
ModTyp(TYPE)
ModDst(DST)
ModBPM(BPM SYNC)
Cutoff(CUTOFF)
EgInt(EG INT)
Reso(RESONANCE)
FitTyp(TYPE)
The motion sequence you edit will return to the state prior to editing
if you switch to another pattern before you write the data. If you want
to keep the edited motion sequence, execute the Write operation
( p.74 "Saving a pattern").
You cannot use the step keys to turn steps on/off while editing a
motion sequence.
Depending on the part, some parameters cannot be selected.
The REC key will not function while you are editing a motion se-
quence.
When selecting "MotDest," you can hold down the shift key and use
the dial to select a parameter for which a motion sequence has not yet
been recorded, and then use MOTION VALUE to edit the values.

Erasing a motion sequence for a part or effect

CLEAR MOTION .....................................................................
Here's how to erase all motion sequence data for a part or effect in a
single operation.
1. If the pattern is playing, press the STOP/CANCEL key to stop play-
back.
2. Hold down the shift key, and press step key 5 (CLEAR MOTION).
(Key 5 will blink.)
3. Press the motion sequence key of the part (drum, keyboard, accent)
or effect whose motion sequence data you want to erase. (You may
select more than one.) The selected key(s) will blink.
4. Press step key 5 once again to execute the Clear operation.
If you decide to cancel, press the STOP/CANCEL key.
This will erase all motion sequences for the selected part or effect.
MOTION VALUE
Disabl, 0...127 (depends on FX TYPE)
Disabl, 0...127 (depends on FX TYPE)
Disabl, 0...127 (depends on FX TYPE)
Disabl, 0...127 (depends on FX TYPE)
Disabl, 0...127 (depends on FX TYPE)
Disabl, 0...127 (depends on FX TYPE)
Disabl, -63...+63
/Disabl, 0...127
Disabl, 0...127
Disabl, L63...R63
Disabl, 0...127
Disabl, 0...127
Disabl, Off, On
Disabl, Off, On
Disabl, 0...127
Disabl, Off, On
Disabl, Fx1, Fx2, Fx3
Disabl, 0...127
Disabl, 0...127
Disab, Saw, Squ, Tri, SH, Env
Disabl, Pitch, Amp, Pan, Cutoff
Disabl, Off, On
Disabl, 0...127
Disabl, -63...+63
Disabl, 0...127
Disabl, LPF, HPF, BPF, BPF+
5. Pattern mode
* Keyboard part ONLY
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Electribe sx esx-1

Table of Contents