Sony Ericsson Aino - U10 Troubleshooting Manual page 56

Connect Power Supply Channel 1 (VBATT) Black and Red Lab Plugs to the TRS Fixture according to
picture 13.
Picture 13
Connect the Power Supply Channel 2 Cable (DCIO/SEPI) and secure it by using the locking screw
according to picture 14.
Picture 14
APPENDIX
Connect the RF Cable Flexible to the GPS RF Connector on the TRS Fixture according to picture 15.
Picture 15
Connect the RF Cable Flexible to the BT/WLAN RF Connector on the TRS Fixture according to picture 16.
Picture 16
SEMC Troubleshooting Manual
Aino - U10
1235-5821 rev. 1 56 (57)