Connect Slider FPC Assy, Display 3" TFT and PBA Top and place them into TRS Fixture Display Holder.
Secure them by using the locking screws according to picture 5.
Picture 5
Place the TRS Fixture Display Holder on the TRS Fixture and secure it by using the locking screws
according to picture 6.
Picture 6
APPENDIX
Troubleshooting Fixture Setup Instructions
Open the TRS Fixture according to picture 7.
Picture 7
Place the PBA on the TRS Fixture by using the Guiding Pins according to picture 8.
Picture 8
SEMC Troubleshooting Manual
Aino - U10
1235-5821 rev. 1
54
(57)