Table of Contents
Advertisement
6: Setup 2 -
If your TV is from an existing set top box by HDMI input:
#
2
1. First disconnect the HDMI cable that comes from your
existing set top box from the HDMI port on your TV.
2. Plug this HDMI cable into the HDMI IN port on the Care
Messenger device.
#
Your set top box HDMI out to Care Messenger HDMI in
3. Using the HDMI cable provided, plug one end into the
HDMI OUT port on the Care Messenger device, and the
other into the same HDMI port on the TV which was
being used previously.
Care Messenger HDMI out using HDMI lead to TV HDMI in
Now go to Section 8: Selecting your source (page 11)
Support: call 0191 206 4004 or visit www.caremessenger.co.uk
pass through (HDMI)
9
To TV HDMI Input
Advertisement
Table of Contents
