Table of Contents
Advertisement
12: Setting wireless network
#
Please note: if you are using an Ethernet cable to connect to
your router, you do not need to do this step. Please proceed
to section 14: Network settings (page 17).
If you chose Wireless networking you will be asked to choose
your Wi-Fi network from the list of detected networks.
Select your network using the up / down
arrows and when selected press OK.
Please note: it can take a few seconds to
connect to your network. Please wait after
pressing the OK button to select, as
pressing it again may skip the next step.
15
Support: call 0191 206 4004 or visit www.caremessenger.co.uk
Advertisement
Table of Contents
