Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Care Messenger DVB-OTT-STB
- Page 1 Welcome to Care Messenger Installation & Setup Version 1.1 DVB-OTT-STB...
- Page 2 Welcome to your new Care Messenger Care Messenger makes keeping in touch easy for everybody, using technology everyone can cope with. It allows you to send messages and pictures from your mobile or computer, straight to a television screen, using our simple box.
-
Page 3: Table Of Contents
Contents 1: Setting up the Care Messenger remote 2: Positioning the Care Messenger device 3: Connections and cables 4: Connecting to your TV 5: Setup 1 - from an aerial 6: Setup 2 - pass through (HDMI) 7: Setup 3 - pass through (CVBS) -
Page 4: Setting Up The Care Messenger Remote
Ensure the batteries are the correct way round. 2. To program the Care Messenger remote, begin by pressing the yellow and green buttons (a) at the same time until the right hand button at the top of the remote (b) flashes twice. - Page 5 Care Messenger device directly underneath or on top of any other electrical equipment. The Care Messenger device must not be stacked on top of equipment such as satellite TV, cable or other set top boxes, or DVD / Blu-ray players.
-
Page 6: Connections And Cables
3: Connections and cables The back of your Care Messenger device looks like this: Aerial CVBS HDMI Ethernet Power Your cable connectors look like this: Aerial /Antenna (NOT APPLICABLE TO USA / CANADA) Output from a TV aerial SD / CVBS / L-R Audio ... -
Page 7: Connecting To Your Tv
4: Connecting to your TV Choose which of these three setups you require: If your TV aerial is plugged directly into your TV with an aerial connector, and you don’t have SATELLITE or CABLE, then you need Setup 1 on page 8. To TV HDMI Input If you have SATELLITE or CABLE or a similar service that provides you with your TV that is plugged into your TV with... -
Page 8: Setup 1 - From An Aerial
2. Disconnect the aerial from your TV and plug it into the ANT IN port on the Care Messenger device. Optional step for those with DVD / Blu-ray device If you wish to plug in a DVD or Blu-ray player connect the HDMI cable from the player to the HDMI IN port. - Page 9 Your set top box HDMI out to Care Messenger HDMI in 3. Using the HDMI cable provided, plug one end into the HDMI OUT port on the Care Messenger device, and the other into the same HDMI port on the TV which was being used previously.
- Page 10 Yellow- CVBS/Video b) White – Left Audio c) Red – Right Audio Care Messenger CVBS out using CVBS lead to TV CVBS in Now go to Section 8: Selecting your source (page 11) Support: call 0191 206 4004 or visit www.caremessenger.co.uk...
-
Page 11: Selecting Your Source
Choose between a wired or WiFi connection If you are using a wired connection to your internet router, this must be plugged into the Care Messenger Ethernet port. If you are using a wireless/Wi-Fi connection there is no need to connect a network cable. -
Page 12: Setting Your Location
9: Setting your location First you need to set your location. UK is the default. If you are in the UK you do not need to change anything. Press OK now. If you are not in the UK, use left / right arrow keys on your Care Messenger remote to select your country. -
Page 13: Network Interface
10: Network interface Next you are asked to set preferences. This step and the next are on the same screen - please read carefully. Choose your Network interface using the left / right arrows on your Care Messenger remote. Select one of the following two options: a) If you are using a cable to connect to ... -
Page 14: Default Input
11: Default input You also need to choose the Default Input to your box using the left / right arrows on your Care Messenger remote. a. If you used Setup 1 select Tuner b. If you used Setup 2 select HDMI ... - Page 15 12: Setting wireless network Please note: if you are using an Ethernet cable to connect to your router, you do not need to do this step. Please proceed to section 14: Network settings (page 17). If you chose Wireless networking you will be asked to choose your Wi-Fi network from the list of detected networks.
- Page 16 Press OK only when the full password has been entered. If you need to switch between upper and lower case options please use the key at the bottom left of the Care Messenger remote pictured here. Support: call 0191 206 4004 or visit www.caremessenger.co.uk...
-
Page 17: Network Settings
14: Network settings On this screen, select the DHCP option and press OK to continue. Note: If you have the knowledge and are able to use the advanced settings, you may enter a static IP address and associated configuration. Support: call 0191 206 4004 or visit www.caremessenger.co.uk... -
Page 18: Tuner Channel Search
If you do not have an aerial connected it is VERY IMPORTANT that you press BACK. Your Care Messenger system is now ready to use. Please refer to the Welcome To Care Messenger - Quick Start & User Guide for information on using Care Messenger, or visit our web site www.caremessenger.co.uk... - Page 19 5. Press the On/Off button on your existing TV remote to send the signal to the Care Messenger remote. 6. If the two lights at the top of the Care Messenger remote blink twice, copying has been successful. If you get a long blink, you will need to repeat step 5.
- Page 20 Support: call 0191 206 4004 or visit www.caremessenger.co.uk...
- Page 21 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.