Setup 1 - From An Aerial - Care Messenger DVB-OTT-STB Installation & Setup

5: Setup 1 - from an aerial

1
#
(Points 1 and 2 NOT APPLICABLE TO USA / CANADA)
1. Connect the Care Messenger device HDMI OUT
port to an HDMI port on your TV using the HDMI
cable provided. The cable only goes into the port
one way, and it doesn't matter which end of the
cable goes into the box or TV, either way will work.
#
#
2. Disconnect the aerial from your TV and plug it into
the ANT IN port on the Care Messenger device.
Optional step for those with DVD / Blu-ray device
If you wish to plug in a DVD or Blu-ray player connect
the HDMI cable from the player to the HDMI IN port.
Now go to Section 8: Selecting your source (page 11)
Support: call 0191 206 4004 or visit www.caremessenger.co.uk
To TV HDMI Input
8
TV