Table of Contents
Advertisement
16: Remote control sync
#
As an optional setup step, we recommend that you copy the
VOLUME, MUTE and ON/OFF controls from your existing TV
remote to your Care Messenger Remote.
To do this read and follow these instructions carefully. Please ensure
both remotes have good battery life, and that the steps are carried
out without interruption or pauses.
1.
Place both remote controls on a flat surface with ends that
normally point to TV facing each other.
#
Your existing TV remote and Care Messenger remote facing each other
2. Press and hold the COPY button on the Care Messenger
remote for 3 seconds. The two lights at the top of the Care
Messenger remote will blink twice.
3. Press the On/Off button on the top left hand side of the Care
Messenger remote until the two buttons at the top begin to
flash quickly. This will be the button that will turn your TV on
and off in the future.
4. Place both remote controls on a flat surface. Make sure that
the ends you normally point at your TV are facing each other.
5. Press the On/Off button on your existing TV remote to send
the signal to the Care Messenger remote.
6. If the two lights at the top of the Care Messenger remote
blink twice, copying has been successful. If you get a long
blink, you will need to repeat step 5.
7.
Now repeat steps 5 & 6 for VOLUME UP, VOLUME DOWN
and MUTE keys. Remember to press these buttons only on
your existing remote not the Care Messenger remote.
8. When all controls are copied, press and hold the COPY
button on the Care Messenger remote until the two lights at
the top blink twice again. This exits the copying mode.
#
Support: call 0191 206 4004 or visit www.caremessenger.co.uk
19
Advertisement
Table of Contents
