Table of Contents
Advertisement
7: Setup 3 -
If your TV is from an existing set top box by CVBS inputs:
#
2
1. Using the HDMI cable provided, plug one end into the
HDMI OUT port on the Care Messenger device, and the
other into the HDMI port on the TV.
2. Locate the Video (yellow connector)
and L and R Audio ports on your set
top box. On most equipment it will
look something like this.
3. Using the 3 ended cable provided,
connect your set top box to the Care
Messenger device ensuring you connect the same
coloured connectors together, if your equipment does
not have coloured connectors or labels then use the
following guide.
a) Yellow- CVBS/Video
b) White – Left Audio
c) Red – Right Audio
Care Messenger CVBS out using CVBS lead to TV CVBS in
Now go to Section 8: Selecting your source (page 11)
Support: call 0191 206 4004 or visit www.caremessenger.co.uk
pass through (CVBS)
10
To TV HDMI Input
Advertisement
Table of Contents
