Sewing - Consew 206RBL Instruction Manual

6. SEWING
6. SEWING
A
CAUTION
A •
Attach all safety devices before using the sewing machine. If the machine is used without these ~ devices attached, injury may result.
A •
Turn off the power switch at the following times. The motor will keep turning even after the power
~ is switched off as a result of the motor's inertia. Wait until the motor stops fully before starting
work. The machine may operate if the treadle is pressed by mistake, which could result in injury.
• When threading the needle
• When replacing the needle and bobbin
• When not using the machine and when leaving the machine unattended
A •
Do not touch any of the moving parts or place any objects against the machine while sewing, as ~ this may result personal injury or damage to the machine.
6-1. Sewing
1. While holding the upper thread with your fingers,
turn the machine pulley by hand toward you until
the lower thread comes out onto the feed dog.
Lower thread
~~
<~ .•
~er'thread
2. Pull the lower thread toward you and check that it
pulls out smoothly.
3. Turn on the power switch.
4. Depress the treadle to start sewing.
When the reverse lever
0
is pushed, the material feed
direction will be reversed, and when it is returned to
its original position, the feed direction will change back
to normal.
- 12 -