ViewSonic VX2835wm-1 Lcd Display page 5

the Interface Connector of the TFT Module.
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are applied
to the TFT Module
(12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
(13) Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source, or be applied exemption.
(14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit
Do not connect the CFL in Hazardous Voltage Circuit.
ViewSonic Corporation
from outside. Otherwise the TFT Module may be damaged.
2
Confidential - Do Not Copy
VX2835wm-1