ViewSonic VX2835wm-1 Lcd Display page 21

4-6 AUDIO INTERFACE (SPEAKER SPECIFICATION)
Line input signal
Maximum Amp power output (Watt)
Amp –THD
Speaker Power rating(Ω/Watt)
Signal to Noise Ratio
Frequency response
SPL.
FO
Line input connection
Vibration
Screen image
Connector PC99 requirement Audio in
Cable type / length
Audio DPMS
ViewSonic Corporation
1.0 Vrms @1kHz
3 W (RL=8Ω)
< 10 % THD @1kHz
8Ω/ 3 W
72 dB
300 – 20kHz
85 ± 3 dB (at 0.5m)
300 Hz
3.5 mm stereo jacks
HDMI
RCA 1 (with YPbPr)
RCA 2 (with CVBS / S-Video)
There should be no audible vibration resonance at
volume=100% & any Freq.
There should be no affect on the screen image stability under
any conditions
Lime Green pantone # 577C
3.5mm stereo cable / 1.8m length
Speakers stay off when the rest of the monitor is in power saving
Note: There is no guarantee <1 W at power consumption in
Active Off mode, when the Audio Cable is connected
18
Confidential - Do Not Copy
VX2835wm-1