ViewSonic VX2835wm-1 Lcd Display page 19

Function descriptions
OSD Lock short cuts function for the buttons
The OSD lock will be activated by pressing the front panel control buttons "(1), & (▲)" for 10
seconds.
If the user then tries to access the OSD by pressing any of the buttons "1", "▼", "▲", "2" a
message will appear on the screen for 3 seconds showing "OSD Locked".
The OSD lock will be deactivated by pressing the front panel control buttons "(1), & (▲)"
again for 10 seconds.
Note1: When the OSD is locked will lock all functions, including "Volume" and "Mute"
Note2: Status bar indicating OSD Lock or Unlock is in progress and when complete it will indicate "OSD
Locked"
Note3: OSD Lock should not lock Power Button and Power Lock function
Power Lock short cuts function for the buttons
The power button lock will be activated by pressing the front panel control buttons "(1), & (▼)"
for 10 seconds.
Locking the power button means that the user won't be able to turn off the LCD while the
power button is locked. If the user presses the power button while it is locked, a message will
appear on the screen for 3 seconds showing "Power Button Locked". It also means that with the
power button locked, the LCD would automatically turn back "On" when power is restored after a
power failure. If the power button is not in the locked mode, then power should return to it's
previous state when power is restored after a power failure.
The power button lock will be deactivated by pressing the front panel control buttons "(1), &
(▼)" again for 10 seconds.
Note 1: Status bar indicating Power Button lock or unlock is in progress and when complete it
will indicate "Power Button Locked"
Note 2: Power should only be lockable in the "On State"
Memory Recall Actions
Memory Recall action on the analog and digital mode as below
1. Set the factory defaults as shown in Section 4-8
2. Clean all the mode setting buffer
3. Execute Auto Image Adjust
Note: Memory Recall should have no effect for Language, Power Lock, User Color Settings or
Input Priority
Resolution Notice Actions
1. Resolution Notice OSD should show on screen after changing to non-native mode for 30 sec
2. The OSD should disappear after 10 sec or by pressing button [1] or [2]
ViewSonic Corporation
16
Confidential - Do Not Copy
VX2835wm-1