Table of Contents
Advertisement
Installation
Installing the repeater
After completing the registration to the main monitor station, install the repeater.
L Refer to "For best performance" on page 5.
1
Connect the AC cord to the AC adaptor, then connect the AC cord to the power outlet.
L� T he POWER indicator lights in green.
2
Confirm the STATUS indicator.
L� T he STATUS indicator shows the radio signal status. Install the repeater in a location
where the indicator lights in green.
STATUS
indicator
Lights in green.
Lights in amber.
Lights in red.
Flashing in red.
3
Install the repeater.
Note:
L� I t is recommended that you install the repeater in a location where the STATUS indicator
lights in green although you can install it in other places where the indicator lights in
amber or red.
L� U se only the included Panasonic AC adaptor PQLV202.
14
Lights in green.
Strong
Weak
Out of range Unable to install the
DC IN jack
DC plug
Status
Able to install the
repeater.
L In places where the
indicator lights in
amber or red, calls
may be interrupted
or disconnected.
repeater.
Change the location.
To power outlet
(100 – 240 V AC)
AC adaptor
AC cord
Advertisement
Table of Contents
