Setting The Time Code - Canon XF300 Instruction Manual

3
[L TC/UB Setup]
[Time Code]
[Setting]
82

Setting the Time Code

Recording
Setting the Time Code's Initial Value
If you set the running mode to [Preset], you can set the initial value of the
time code.
1 Open the time code [Setting] submenu.
[L TC/UB Setup]
2 Select [Set] and then press SET.
• The time code setting screen appears with an orange selection frame
indicating the hours.
• To reset the time code to [00:00:00:00], select [Reset] instead. If the
running mode is set to [Free Run], the time code will start running
immediately.
3 Select the hours and then move (A) to minutes.
4 Change the rest of the fields (minutes, seconds, frame) in the same
way.
• Press the CANCEL button to close the screen without setting the
time code.
5 Select [Set] to close the screen.
• If the running mode is set to [Free Run], the time code will start
running immediately.
[Time Code] [Setting]