Deleting Clips; Deleting The User Memo - Canon XF300 Instruction Manual

5
[J Other Functions]
[Clips]
[Delete All Clips]
136
Clip Operations
Playback

Deleting Clips

You can delete any clip except those with an e mark. To delete such
clips, delete the e mark beforehand.
Deleting a Single Clip
1 Select the desired clip and then press SET to open the clip menu.
2 Select [Delete Clip] and then press SET.
• The clip information screen appears and it prompts you to confirm
the operation.
3 Select [OK] and then press SET.
• Select [Cancel] instead to cancel the operation.
• While the clip is being deleted, the operation cannot be canceled.
4 When the confirmation message appears, press SET.
Deleting All Clips
1 Open the [Delete All Clips] submenu.
[J Other Functions]
2 Select [OK] and then press SET.
• All of the clips (except for clips with an e mark) on the selected CF
card will be deleted.
• Select [Cancel] instead to cancel the operation.
• While the clips are being deleted, you can press SET to cancel.
3 When the confirmation message appears, press SET.
IMPORTANT
• Observe the following precautions while the CFj or CFl access
indicator is illuminated in red. Failure to do so may result in permanent
data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the cover of the selected CF card slot.

Deleting the User Memo

1 Select the desired clip and then press SET to open the clip
menu.
2 Select [Delete User Memo] and then press SET.
• The [Delete User Memo] screen appears and it prompts you to
confirm the operation.
3 Select [OK] and then press SET.
• The user memo is deleted and the screen changes back to the clip
index screen.
• Select [Cancel] instead to cancel the operation.
[Clips] [Delete All Clips]