Setting The Time Code; Assigning Buttons - Canon EOS C100 Basic Manual

In order to focus more accurately, you can use two focus
assistance functions – peaking, which creates a clearer
contrast by emphasizing the outlines of the subject, and
magnification, which enlarges the image on the screen.
You can use both functions simultaneously for greater effect.
Peaking
Select LCD/VF Setup > Peaking
Open the submenu to select the peaking level and change the
colour.
We recommend you set the peaking colour to red
Magnification
Press the MAGN. button.
If necessary, use the joystick to move around the orange frame
and check other parts of the image.
Set the focus mode switch on the lens to MF in advance.
You can move the orange frame 5steps vertically or horizontally.
Press the CANCEL button to return the magnification frame to the
center position.
Press the MAGN. button again to cancel the magnification.

Setting the Time code

This setting enables you to set the TC. I would suggest using time
of day and in free run mode. Good to use for logging shots and on
multi camera shoots.

Assigning Buttons

Basic Guide to the C100
Select Timecode > Mode > Preset
Timecode > Run > Free Run
Setting > Set to time of day
tsanderson@glos.ac.uk