Taking Photos In Camera Mode - Canon XF300 Instruction Manual

Hd camcorder
Hide thumbs Also See for XF300:
Table of Contents

Advertisement

7
Taking Photos
You can take photos when the camcorder is in
capture a photo from a clip when the camcorder is in
Photos are saved onto the SD card. In
1920x1080*. In
mode, photo size depends on the resolution
setting of the clip that the photo is captured from. If the clip is 1920x1080
or 1440x1080, the photo size is 1920x1080. If the clip is 1280x720, the
photo size is 1280x720.
* At this size, the camcorder can save approximately 670 photos on a 1 GB SD
card.

Taking Photos in CAMERA Mode

You can take a photo while the camcorder is recording a clip or is in
record pause mode. If a custom picture file is selected in advance, it will
be recorded with the photo (0 111). To take a photo, set an assignable
button to [Photo] first or use the wireless controller.
Operating modes:
1 Set an assignable button to [Photo] (0 109).
• This step is not necessary if you are using the wireless controller.
2 Press the assignable button to take a photo.
• Alternatively, press the PHOTO button on the wireless controller.
• [b] and the number of available photos appear on the upper right
portion of the screen.
• If a custom picture file is selected, it will be recorded with the photo.
• The SD card access indicator will flash as the photo is being
recorded.
mode or you can
mode.
mode, photo size is
Photos
Photos
Photos
Taking Photos
7
157

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xf305

Table of Contents