Assembly Instructions; Unpacking; Trainer Body Assembly; Trainer Base Assembly - LeMond Revolution Service Manual

Before leaving the manufacturing facility, your LeMond
R
Your LeMond
EVOLUTION
damage. If damage is found please contact the delivery company and the LeMond Customer Service
Department at (612) 486-5750 to report any damage.

UNPACKING

Remove all components and parts from the packaging and check them against the list below and Figure 1.1.
The following items are included with your LeMond

Trainer Body Assembly

Trainer Base Assembly

One (1) long button head M8 by 60mm screw
Skewer Assembly
Trainer Body Assembly
Trainer Base Assembly
6
should arrive packed in 1 carton. Upon arrival fully inspect the carton for

ASSEMBLY INSTRUCTIONS

R
bike trainer was thoroughly inspected.
EVOLUTION
R
bike trainer:
EVOLUTION
5mm Allen key for assembly
Quick-Start Guide
Owner's Manual
Skewer Assembly
M8 x 60
5mm Hex Key
FIGURE 1.1