Unstable In Some Or All Riding Positions; Excessive Vibration While Riding; Cannot Shift To Largest Rear Sprocket - LeMond Revolution Service Manual

D
1.
the axle. (p. 15)
2. Check to make sure that the spacer is present on the skewer and that it is positioned properly for
your bicycle type. (p. 15 Figure 3.1)

Unstable in some or all riding positions

1. Check to make sure that the
2. Ensure that the leveling feet on the
3. Check that the base screws are secure. (p. 13 Figure 1.2)
4. Check that the bicycle is mounted properly following the instructions in this manual. (p. 15)
5. If the unit still feels unstable please contact the LeMond Service Department.

Excessive vibration while riding

1. Check that the bicycle is mounted properly following the instructions in this manual. (p. 15)
2. Check that the base screws are secure. (p. 13 Figure 1.2)
3. If you have removed and reinstalled the cassette or cassette adaptor ensure that the instructions
torque. (p. 22)
4.
cisely.

Cannot shift to largest rear sprocket

Note: In some cases the largest sprocket on the rear cassette is not accessible due to variations in derail-
leur style and setup. We DO NOT recommend modifying your bicycle for use with the Revolution as
please follow the steps below.
1. Readjust your derailleur to access the largest sprocket.
2. Remove 1-3 links from your chain to decrease the downward throw of your rear derailleur.
24
R
EVOLUTION
R
base are level and secure. (p. 14 Figure 1.3)
EVOLUTION
TROUBLESHOOTING
-