Pulley Removal/Installation; Pulley Removal And Flange Replacement - LeMond Revolution Service Manual

PULLEY REMOVAL/INSTALLATION

REQUIRED TOOLS
Chain Whip
Shimano®/SRAM® or Campagnolo® Lockring Tool
16mm Socket and Socket Wrench
Torque Wrench
4mm Hex Key or Hex Socket
REQUIRED PARTS
N/A
REMOVAL INSTRUCTIONS
1. Remove the belt. (p. 15)
2. Remove the Cassette and Cassette Adaptor (p. 12)
3. Slide the Pulley assembly o the shaft. (Figure 6.1)
INSTALLATION INSTRUCTIONS
1. Slide the Pulley assembly onto the shaft. (Figure 6.1)
2. Install the Cassette and Cassette Adaptor (p. 12)
3. Install the belt. (p. 15)
4. Tension the belt. (p. 16)
PULLEY REMOVAL AND INSTALLATION
FIGURE 6.1
17