How To Use The Mixer; To Attach Turbobeater; Accessories; To Remove Turbobeater Accessories - KitchenAid Ultra Power Plus Instructions And Recipes Manual

Be sure to read and follow the specific
instructions in this manual for proper
use of this mixer.
WARNING
!
Injury Hazard
Unplug mixer before touching
beaters.
Failure to do so can result in
broken bones, cuts or bruises.
Note: With the Power Switch in the ON
position, an accidental touching of the
speed control, or other circumstances
may result in turning on the mixer. If
mixer runs when "0" speed is flashing,
do not use; call 1-800-541-6390 to
arrange for service.

TO ATTACH TURBOBEATER™

ACCESSORIES

• Be certain the Power Switch is in the
OFF position.
• Unplug mixer from electrical outlet.
• Insert the TurboBeater Accessory (D),
which has a collar, in the larger
opening (B), line up flanges on
accessory with the slots in the
opening and push in until it locks in
place.
C

How to Use the Mixer

D
• Insert the TurboBeater Accessory (C),
which has no collar, in the smaller
opening (A), line up flanges on
accessory with the slots in the
opening and push in until it locks in
place.
A
TO REMOVE TURBOBEATER
ACCESSORIES
• Be certain the Power Switch is in the
OFF position.
• Unplug mixer from electrical outlet.
• Press the Ejector Button (E) to release
TurboBeater Accessories from mixer.
• Remove TurboBeater Accessories
from mixer.
9
Slots
B
E