Table of Contents
Advertisement
Trouble Shooting Chart
Most faults have a simple cause and can therefore be rectified on site, i.e. time
losses and transport costs can be avoided. Some of the most frequent faults are
explained below. If this information is insufficient, please consult our technical
support or your authorized TITAN
Pump does not pressurize
• Air in pump
• Changeover valve jammed
• Pressure converter defective
Pump pressurizes inadequately
• Air in pump
• Gear wheels worn out
Pump does not reach pressure
• Pump worn
• Valve worn
• Relief valve misadjusted
Pressure cannot be relieved
• Solenoid valve jammed
Technical data
1. Gear pump
Operating pressure p max:
Conveyed volumes:
2. Pressure Intensifier
3.
Converting ratio
Operating pressure p max:
Conveyed volumes:
Toll-Free: 866.345.8484 • Phone: 281.449.9994 • Fax: 281.449.9996 • Email:sales@titanti.com
®
Repair Facility.
Switch motor on and off several times
Switch by hand
Replacement necessary
Switch motor on and off several times
Replacement necessary
Replacement necessary
Leak to tank
Adjust pressure limiting valve
Switch by hand
230 bar
LP – 1.5 l/min until 4 l/min up to 230 bar
1:13
2500 bar
HP – 0.9 l/min up to 2500 bar
TITAN Technologies International, Inc.
9001 Jameel Street, Suite 180 • Houston, TX 77040
http://www.titanti.com
®
Advertisement
Table of Contents
