Adjusting The Wheel Clutch - DR All-Terrain FIELD and BRUSH MOWER Safety & Operating Instructions Manual

Hide thumbs Also See for All-Terrain FIELD and BRUSH MOWER:

Table of Contents

Adjusting the Wheel Clutch

Note: When properly adjusted, tension on the wheel clutch lever should increase when

Tools Needed:

(2) 1/2" wrenches

1. Find the wheel clutch adjustment on the clutch bracket on the underside of the

machine (Figure 21).

Loosen the nut on the front (threaded) side of the bracket by 1/8" to 1/4", and

then tighten the nut on the back against the bracket. Check the tension on the

clutch lever and repeat the adjustment as needed.





ALL-TERRAIN

FIELD and BRUSH MOWER Safety & Operating Instructions

WARNING! Before performing any maintenance procedure, stop the

engine and disconnect the spark plug wire(s).

the lever is about parallel to (almost touching) the handlebar grip.

WARNING! If clutch is over tightened, machine may lurch forward when

shifting into gear. Use caution when shifting into gear.

Wheel Clutch Adjustment

Figure 21

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the All-Terrain FIELD and BRUSH MOWER and is the answer not in the manual?