Rear Panel; Power - Lab.gruppen E 4:2 Operation Manual

12. Rear panel

12. Rear panel
POWER STATE
CONTROL MONITOR
GPI GPO
GPIO
connectors

12.1. Power

The Power control button is located in the middle. When pressed momentarily it toggles the power state
between standby and on.
The Power state indicator is located to the right of the button. It illuminates amber as soon as the amplifier reaches
standby, and turns green when the amplifier is fully on.
CHANNEL 2 POWER
-10dB -10dB
70V
SIG
-Inf 0
Lo-Z
12
E SERIES Operation Manual rev 2.0.0
BALANCED INPUTS CHANNEL 1 CHANNEL 2
CH 1 CH 2
-10dB -10dB -10dB -10dB
HIGH HIGH
PASS 70V PASS 70V
SIG SIG
-Inf 0 -Inf
FULL Lo-Z FULL Lo-Z
RANGE RANGE
3-pole block Switches,
type input indicator and
connectors attenuator per
channel
BALANCED SPEAKER OUTPUTS
CH 1
POWER
0
Power control
and indicator
Locking IEC; must be grounded/earthed
00-240V
CH 2
DO NOT
CONNECT ANY
TERMINAL TO
GROUND.
CLASS 2 WIRING
Ser. N:o
Removed!
Locking IEC; must be grounded/earthed
BALANCED SPEAKER OUTPUTS
00-240V 50-60Hz
CH 1 CH 2
DO NOT
CONNECT ANY
TERMINAL TO
GROUND.
CLASS 2 WIRING
Ser. N:o
Removed!
2-pole block
type output
connections
50-60Hz
E 12:2
Designed in Sweden
manufactured in Thailand
Audio Power Amplifier
for professional use
4GC7
E 12:2
Designed in Sweden
manufactured in Thailand
Audio Power Amplifier
for professional use
4GC7
Mains input
100 -240
VAC,
@ 50 or 60 Hz