Installing The Honeywell Ip Utility; Before You Begin; Installing The Ip Utility - Honeywell HBD2FR1 User Manual

Installing the Honeywell IP Utility

You can install the IP Utility from the DVD that came with your camera or you can download the
latest version from Honeywell's Download Center (recommended):
http://www.honeywellsystems.com/support/download-center/index.html
To receive a user name and password for accessing the Download Center, contact the
customer service center within your region. This information is provided on the Download
Center webpage.

Before You Begin

Before you begin installing the IP Utility, do the following:
1.
2.
3.

Installing the IP Utility

The IP Utility is installed on your workstation using InstallShield. When you install the IP Utility,
a networking protocol (Bonjour) is also installed that enables the automatic discovery of IP
network devices.
Note If you have an older version of Honeywell IP Utility installed on your computer you
may need to uninstall it before you can install the new version. For instructions on
how to uninstall the IP Utility, see
Ensure that your workstation meets the following system requirements:
Operating System Windows XP Professional, SP3
Windows Server 2003 R2 (32 bit)
Windows Vista, SP1
Windows 7 (32/64 bit)
Windows Server 2008 R2 (64 bit)
CPU Pentium 4, 3.1 GHz or faster
System Memory 1 GB (32 bit) or 2 GB (64 bit)
Ensure that you have Windows administrator privileges for the workstation on which you
are installing the IP Utility.
Confirm that your camera is connected to the network (see
page 21).
Installing the Honeywell IP Utility | 27
Uninstalling the Honeywell IP Utility
Connecting the Cables
800-13338 - A - 03/2013
on page 33.
on