Honeywell HBD2FR1 User Manual page 78

78 | HBD2FR1(X) User Guide
Mechanical
Dimensions (W × H)
Weight
Construction
Connector
Environmental
Temperature
Relative Humidity
Rating
Network
Video Compression
Resolution
Software Update
Frame Rate
Video Streaming
Security
Video Access from Web
Browser
Minimum Browsing
Requirements
Installation, Management,
and Maintenance
Supported Protocols
Standards
www.honeywellvideo.com
11.83 × 4.3 in. (300.5 × 109.1 mm)
3.92 lb (1.78 kg)
Housing: Die-cast aluminum
Finish: Cool gray powder coat
Aux video output: 2-pin Molex connector
Power input: Removable screw terminal block
Network: RJ45 connector
Alarm I/O
Audio input
Operating: -4°F to 122°F (-20°C to 50°C)
Storage: -40°F to 158°F (-40°C to 70°C)
0% to 85%, non-condensing
IP66
Dual stream H.264 and/or H.264/MJPEG
Primary Stream: 1920×1080,1280×720, 800×450, 640×360, 320×180
Field upgradeable
Up to 30 fps (NTSC) / Up to 25 fps (PAL)
Dual streaming: H.264 and/or H.264/MJPEG
Controllable frame rate and bandwidth
Multiple user access levels with password protection
Full control of all camera settings available to administrator
Pentium 4 CPU 3.1 GHz or faster, 1 GB RAM (32 bit) or 2 GB RAM (64 bit),
Windows 7 (32/64 bit), Windows Server 2008 R2 (64 bit), Windows Vista SP1,
Windows Server 2003 R2 (32 bit), Windows XP Professional SP3, Internet
Explorer 8 or 9, Google Chrome v23.0.1271.97 or later, Mozilla Firefox v17.01
or later
Honeywell IP Utility software identifies the IP address, checks device status,
and upgrades firmware over HTTP. Available at
www.honeywellsystems.com/support/download-center/index.html
HTTP, TCP, RTSP, RTP, UDP, ARP, DNS, NTP, RTCP, FTP, ICMP, DHCP,
Bonjour, IGMP, SSH
ONVIF (Profile S)