TONER EMPTY
ENERGY SAVER
AUTO CONTINUE
Configuration Menu Overview
Settings
STOP / CONTINUE
When set to
CONTINUE
even if the toner cartridge is empty.
When set to
STOP
toner cartridge is empty.
Settings
15 MINUTES / 30 MINUTES
/ 60 MINUTES/
120 MINUTES
Sets the length of time until the printer enters
Energy Saver mode after it no longer receives
print jobs or is not operating.
120 MINUTES
is displayed only on the
model for the Americas.
The Energy Saver mode is automatically can-
celled when any of the following occurs:
# The printer is restarted.
# A print job is received.
# Any key on the control panel is pressed.
# The top cover is opened, then closed.
This menu is displayed only on the model for
the Americas when
ENERGY SAVER
Settings
ON / OFF
ON
When set to
, the printer continues printing
if the correct size media is not loaded in the
specified tray.
OFF
When set to
, the printer stops and
displays a message indicating that media
should be loaded into the specified tray if the
specified tray runs out of media.
, printing continues
, printing stops when the
ENGINE/SERVICE/
ON
is set to
.
29