Working With The Status Display; Introduction; Opening The Status Display And Showing The Supplies Status; Altering The Size Of The Status Display Window - Konica Minolta magicolor 2530 DL User Manual

Working with the Status Display

Introduction

The Status Display shows information about the current status of the printer.
! "
The Status Display requires that Enable Bidirectional Support be
selected in Printing Properties.
Opening the Status Display and Showing the Supplies
Status
Use one of the following steps to open the Status Display:
#
Windows XP/Server 2003—From the start menu, choose All Programs,
KONICA MINOLTA, magicolor 2530DL, and then Status.
#
Windows 2000/Me/98SE/NT 4.0—From the Start menu, choose Pro-
grams, KONICA MINOLTA, magicolor 2530DL, and then Status.

Altering the Size of the Status Display Window

#
From the Display menu, choose Status (Reduce) to decrease the size of
the window.
#
From the Display menu, choose Status (Expand) to increase the size of
the window.

Using the Status Display

#
When the background of the printer graphic is green, the printer is in
standby mode or a job is printing normally.
#
When the background of the printer graphic is red or yellow, there is an
error and the job has been interrupted. The status of the printer and the
error message are shown in the dialog boxes on the left.
The function areas include:
#
Printer Status—Displays text messages that describe the current opera-
tional status of the printer.
#
How to Recover—Provides you with explanations of what you need to do
in order to correct problems and recover from error conditions.
#
Warning Status—Displays text messages that alert you of conditions
such as low toner.
#
Printer Status Figure—Shows a graphic representation of the printer
and indicates where the problem is.
16 Working with the Status Display