Konica Minolta magicolor 2530 DL User Manual page 117

Symptom
Images
cannot be
printed from
the digital
camera.
Printing
takes too
much time.
Blank pages
are printed.
Solving Other Problems
Cause
The digital camera
transfer mode is not
set to PictBridge.
! "
Printer only
supports a
PictBridge
compliant
digital camera.
The printer is set to a
slow printing mode
(for example, thick
stock or transpar-
ency).
The printer is set to
power saving mode.
The job is very com-
plex.
The printer memory is
insufficient.
A toner cartridge for a
different region is
installed ( INCOR-
RECT CART. X
displayed in the mes-
sage window).
One or more of the
toner cartridges are
defective or empty.
The wrong media is
being used.
Solution
Set the digital camera transfer mode to
PictBridge.
It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
It takes time for printing to start in
power saving mode. If you do not want
to use this mode, disable it. (
SERVICE / ENERGY SAVER
Wait. No action needed.
Add more memory.
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific printer.
is
Check the toner cartridges. The image
will not print correctly or not at all, if the
cartridges are empty.
Check that the media type set in the
driver matches the media loaded in the
printer.
ENGINE /
menu)
109