Canon PIXMA iP6600D Series Quick Start Manual page 123

Message Try This
The remaining level of the
following ink cannot be correctly
detected.
uno
I
An ink tank that was once empty is installed.
Replace the ink tank.
Printing under the situation may damage the Print Head. Canon shall not be liable
for any printer malfunction or damage caused by refitted ink tanks.
I
If you want to continue printing with the refilled ink tank installed, press and hold
the
Stop/Reset
button for at least five seconds, and then release it. Using refilled
ink tanks is memorized.
*
This operation will release the function for detecting the remaining ink level.
The following ink tank cannot be
recognized.
U140
U043
Possible causes are as follows:
• The ink tank may not be installed properly (The lamp on the ink tank is off).
Install the appropriate ink tank.
• The ink tank may not be compatible with this printer (The lamp on the ink tank is
off).
Install the appropriate ink tank,
I
See "Replacing an Ink Tank" on page 50.
~llowing
ink tank cannot be Ink tank errors have occurred (The lamp on the ink tank is oft).
recognized. Replace the in k tank.
l:J2
5_0
t--s_e_e_"_R_e_pl_a_c_in_g_a_n_'_n_k_Ta_n_k_"_o_n_ p _a_ g _e_5_0_,
----I
I
Error code An error that requires contacting the Customer Care Center may have occurred.
(POWER
lamp and
Alarm
lamp flash alternately.)
Disconnect the printer cable from the printer, and then turn the printer off and
unplug the printer from the power supply, Plug the printer back in and turn the
printer back on after leaving it for a while.
If the problem remains, contact the Customer Care Center.
61