Possible Cause
I
Try This
The inner cover is open
Close the inner cover completely. Paper does not feed properly if the inner cover is
even slightly open.
W
Note
If
the printed surface is still scratched
Follow the procedure below and set the Prevent paper abrasion to ON. This
procedure also applies to direct printing from your camera.
1. Press the Menu button.
2. Use the
~ ~
buttons to select Maintenance/settings and then press the OK
button.
3. Use the
~ ~
buttons to select Device Settings and then press the OK button.
4. Use the •
~
buttons to select Print settings and then press the OK button.
S.
Use the •
~
buttons to select Prevent paper abrasion and then press the OK
button.
6. Use the •
~
buttons to ON and then press the OK button.
*
After printing is completed, return the Prevent paper abrasion to OFF.
66