Canon PIXMA iP6600D Series Quick Start Manual page 114

4
Remove the ink tank with flashing red lamp fast.
(1) Push the tab and remove the ink tank.
Do not touch the print head lock lever; remove only the
ink tank.
Push the tab and remove the ink tank.
WNote
Be sure to replace the ink tank one by one when
~
replacing more than one ink tank.
=::::-- ' ---
~Important
•
Handle ink tanks carefully to avoid staining clothing or the
surrounding area.
• Discard empty ink tanks according to the local laws and regulations
regarding disposal of consumables.
5
Prepare a replacement tank.
Do not touch the electrical contacts. Doing
so can cause the printer to malfunction or
become unable to print.
(1) Unpack the new ink tank and completely pull off the orange tape. Then, remove
the film.
(2) Remove the orange protective cap from the bottom of the ink tank and discard it.
~Important
•
Be sure to remove the clear film from the ink tank in the exact order
shown in step 5-(1), as failure to follow this step may cause the ink
to leak and stain your clothes and hands.
• Do not squeeze the side of ink tanks as this may cause the ink to
leak out and stain your clothes and hands.
• Do not re-attach the protective cap once you have removed it.
• Once the protective cap is removed, do not touch the open ink port.
• Ensure that all the orange tape has been peeled off along the
perforation. If there remains a part of the orange tape, ink may not
be ejected correctly.
52