Advertisement
Settings
The settings option is available when "MyMediaShare" is accessible. The most common reason to access the settings
will be related to Wi-Fi and Internet Bridge Settings
Host
Must begin with a letter and followed by a
combination of letters, numbers or dashes (-).
Name
Length must be 2-8 characters.
admin password is blank by default, can be changed
User
but once changed cannot be returned to blank state
except by using reset button.
Currently not necessary to make any changes,
reserved for future use.
Storage
Displays the available and total capacity of the
connected USB and SD storage devices
Firmware
1) Save the new file to the root directory of an SD
memory card or USB storage device.
Upgrade
2) Attach the above storage device to your
MediaShare, and then power up MediaShare.
3) Connect your smartphone/tablet to MediaShare.
4) Open the MediaShare app and navigate to the
Settings screen.
5) Click "Firmware Upgrade". The new firmware file
will be installed. As your MediaShare reboots you
will lose Wi-Fi connection to your smartphone/tablet.
6) Reconnect to your MediaShare wirelessly.
Device
You can modify the SSID to any name with a length
of 1-32 characters including letters, numbers or
Name
dashes (-). Press "Set" after entering the name for
the change to take effect.
Press Security Options to change to
Security
No Security
Options
WPA-PSK
WPA2-PSK or
Mixed WPA/WPA2-PSK (default)
You can also change the password via this option
Press "Set" after entering the name for the change
to take effect.
Mode
Press Mode to change wireless mode to
11Mbps (802.11b)
54Mbps (802.11g)
150Mbps (802.11n)
Mixed 11b/g/n (default)
LAN
Press LAN to customise the IP Address setting &
Subnet Mask
Advertisement
