Product View - Verbatim MediaShare Wireless SD/USB device User Information

Product View

9
8
COMPONENT
1. Battery Level LED
2. Read / Write LED
3. WiFi LED
4. WAN LED
5. USB Host Port
6. Reset Button
7. SD Card Slot
8. USB Device Port
9. Power Button
10. SSID Name
11. Password
12. MAC Address
13. Serial Number
1
2
3
4
5
6
7
DESCRIPTION

Green ON: The battery power is more than 30%.

Red ON: The battery power is between 10% and 30%.

Red Fast Flashing: The battery power is depleted and the unit will soon shut down.

Green Slow Flash (every 2 seconds): The battery is charging.

Green Slow Flash (every 1.5 seconds): The device is shutting down.

LED off: The device is powered off.
During WiFi disk mode:

Blue ON: Memory connection is successful.

Blue Flashing: Memory is reading or writing.
During Card reader mode:

Blue ON: Connected to USB2.0

Blue Flashing: Connected to USB2.0 and is reading or writing.
Blue LED shows the WiFI connection state.

Flashing indicates that initiation is in process.

ON indicates WiFi initiation has completed.

The LED is OFF for the following situations:

Device is on, but the WiFi signal is weak.

Device is off.

Device is in Mobile Mode but the WiFi is off.

Green: Connected to WAN via the bridge.

Off: Not connected to the Internet.
Insert a USB flash drive or USB hard drive for WiFi access.
Reset the device to Factory Default configuration. Use a straightened paper clip or pin to activate the switch.
Any changes made to system settings such as passwords, SSID, bridged Wireless LAN settings will be lost
Insert SD card for WIFI access. Insert microSD card using appropriate adapter.
Use the included USB cable to connect to a computer over USB 2.0. Then you can transmit data and charge
the device.
Turns the device on/off.
Service Set Identifier, default wireless network name, each MediaShare Wireless has a unique SSID
changed by user).
Unique password to enable access to MediaShare Wireless network
MAC – Media Access Code – unique global code to identify device on network
Each MediaShare Wireless has a unique serial number.
11
10
12
13
(Can be changed by user).
(Can be