USING THE BUILT-IN FLASH
In P mode, the built-in flash will pop-up automatically when
the shutter is pressed partway down. Once the flash is up, it
will fire when necessary.
• The shutter will not release until the flash is charged.
• Select flash cancel (
) when you don't want the flash to fire.
• Do not touch the flash when it fires.
32
Manual Fill-Flash
Flash Cancel
Use flash cancel when photographing twilight scenes or to
capture the ambiance of existing light.
If the flash lamp blinks slowly, the required shutter speed is
too slow to hand hold the camera. Turn the flash on or use
a tripod.
• Press the program-reset button or flash-mode button to return
to autoflash mode.
Press the flash-mode button
until
appears in the data
panel.
33