Manual Focus; Using The Built-In Flash - Minolta APS Camera Instruction Manual

MANUAL FOCUS

When autofocus is not suitable and focus hold is not
possible, focus the lens manually. The autofocus system will
monitor focus and indicate when the subject in the focus
frame [ ] is in focus.
•Manual focus is not available on lenses without a focusing ring.
•Press the focus-mode button again to return to autofocus
mode.
40
1. Press the focus-mode
button, will
appear in the data panel
and will appear in the
viewfinder.
2. Turn the focusing ring
until your subject
appears sharp and
focused.
•The focus confirmation signal
( ) will appear in the
viewfinder when the subject in
the focus frame is in focus.
USING THE
BUILT-IN
FLASH
41