Controlling The V-440Hd From A Pr-80/50; Controlling An Rss M-400 From The V-440Hd - Roland V-440HD Owner's Manual

Reference
Controlling the V-440HD from a
PR-80/50
By setting the V-440HD to "PR Control" from the menu, you can
control the V-440HD remotely from an PR-80 or PR-50 (hereafter
referred to as PR Series devices). With this setup, the
V-440HD functions just like one of the video clips contained in the
PR series device.
Use a PR-80/50 running ver. 1.2 or later. The V-440HD's PR
Control feature is not compatible with earlier versions, which
prevents use of the functions described above.
[What you can do when a PR series device and the V-440HD are
connected]
• You can seamlessly switch HD, RGB, and SD video input to the
V-440HD with the video clips contained in the PR series device.
You can employ the user interface of the PR series device for
overall control.
• You can use the PR Series Scheduler for automatic operation of
the V-440HD.
Example of Connections When Using PR Control Mode
Composite or S-Video
MIDI
[PR-80/50]
[SD]
[HD]
[RGB]
[Raar panel]
* For instructions on setting and operation of the PR series, refer to the
PR-80/50 Owner's Manual.
* Connect the video output from the PR-80/50 to one of the SD input
connectors 1–4 (S-Video or Composite).
56
Setting PR Control on the V-440HD
Use the following procedure to set PR mode.
1.
Press the MENU button.
2.
Select "14. MIDI Setup."
3.
Press the ENTER button.
4.
Select "30. PR Control."
5.
Press the ENTER button.
6.
Select "On."
Enabling this setting allows the V-440HD to be run from the PR
Series device.
Controlling an M-400 from the
V-440HD
The audio input level of the M-400 live mixing console can be
controlled from the V-440HD.
[What you can do when a M-400 device and the V-440HD are
connected]
• You can adjust the audio input level of specific channels of the
M-400 by pressing the channel buttons of the SD or HD/RGB
sections of the V-440HD.
• You can control the audio input level of specific channels of the
M-400 by moving the video faders of the SD or HD/RGB
sections of the V-440HD.
The crossfading balance of both audio and video can be
controlled with the video faders of the SD or HD/RGB sections
of the V-440HD.
Connection Example
MIDI
MIDI OUT
Switching V-LINK Mode On
1.
Press the MENU button.
2.
Select "14. MIDI Setup."
3.
Press the ENTER button.
4.
Select "5. V-LINK Switch."
5.
Press the ENTER button.
6.
Select "On."
V-LINK mode is switched on. When V-LINK is on, the M-400 is
controlled with V-LINK messages (Roland System Exclusive
Data Set 1) transmitted from the V-440HD.
* Refer to the M-400 Owner's Manual while carrying out this
procedure.
2 07
.
MIDI IN