Roland V-440HD Owner's Manual page 35

Saving the P in P Effect Settings (HD/RGB)
To use P in P effect settings the next time the V-440HD is turned on,
save the settings to the P in P PATTERN buttons (HD/RGB).
When a P in P PATTERN button (HD/RGB) is held down for at least
two seconds, the P in P settings are saved to that button. All of the P
in P PATTERN buttons (HD/RGB) flash when saving of the settings
is completed.
Any settings previously stored to a P in P PATTERN button (HD/
RGB) are overwritten when new settings are saved to that button.
* To call up saved settings, press the P in P PATTERN button (HD/
RGB) to which the settings are saved.
Advanced P in P Effect Settings (HD/RGB)
Make the P in P effect settings from the menu with the "3. HD/RGB
P in P/Zoom" parameters. Select the P in P PATTERN button (HD/
RGB) to which the settings are assigned with "P in P 1" to "P in P 5."
Settings can be made for the following parameters.
3. HD/RGB P in P/Zoom Settings Parameters
Size Sub screen size adjustment
X Position Sub screen horizontal position adjustment
Y Position Sub screen vertical position adjustment
Zoom Sub screen zoom size adjustment
Pan X Position Sub screen panning horizontal position adjustment
Pan Y Position Sub screen panning vertical position adjustment
Border Size Sub screen border width adjustment
Border Color Sub screen border color adjustment
Border Edge Sub screen edge
Crop Selects crop mode of sub screen
PinP Reset Resets the above settings to the original factory settings
* For more on the menus, refer to "Menu Operations" (p. 25).
* When key composite effect (p. 36) or multi-screen output (p. 44) are in
use, you can not use "Border Size", "Border Color" and "Border
Edge" Function.
* You can quickly access the menu's P in P parameters by holding down
the MENU button and pressing a P in P PATTERN button (HD/
RGB).
HD/RGB Section Operations
Changing the Aspect Ratio of the Sub Screen
You can select any of three aspect ratios for the sub screen: 16:9, 4:3,
or Original.
1.
Press the MENU button.
2.
Select "3. HD/RGB PinP/Zoom."
3.
Select the channel in which you want to make the settings
from "HD/RGB PinP1"-"HD/RGB PinP5."
4.
Press the ENTER button.
5.
Select "10. Crop."
6.
Press the ENTER button.
7.
Select the aspect ratio of the sub screen.
Select the desired aspect ratio from the menu.
• Original: The sub screen is displayed with the aspect ratio
used for the video being input (4:3 or 16:9).
• 4:3: Even when video with an aspect ratio of 16:9 is
input, the aspect ratio is switched and the sub screen
is displayed at 4:3.
• 16:9: Even when video with an aspect ratio of 4:3 is input,
the aspect ratio is switched and the sub screen is
displayed at 16:9.
35