Panel Facilities; Panel Section - Pioneer CDJ-1000MK3 Service Manual

5

8. PANEL FACILITIES

8.1 PANEL SECTION

Upper Panel
1 2
35
34
33
32
31
30
29
28
27
26
1. Display selector button (TEXT MODE)
Each time this button is pressed, the display alternates between
WAVE and TEXT (track name/album name/artist name).
When playing MP3, WAVE display may not be possible,
depending on the track.
2. TIME MODE/AUTO CUE button
TIME MODE:
Each time the button is pressed, the display's time display
alternates between the current elapsed play time and the
remaining play time (REMAIN).
When playing MP3, the REMAIN time may not display
immediately, depending on the track.
¶ The current TIME MODE setting is retained in memory even
when the power is turned off.
AUTO CUE:
When the button is held depressed for 1 second or more, the
AUTO CUE mode is alternately enabled and disabled.
When the button is held depressed for 5 seconds or more, the
AUTO CUE level is toggled.
¶ The current AUTO CUE on/off and AUTO CUE level settings
are retained in memory even when power is turned off.
3. LOOP IN/REALTIME CUE (IN ADJUST) button/indicator
Realtime cue
Loop-in point input
Loop-in point adjust
4. LOOP OUT (OUT ADJUST) button/indicator
Loop-out point input
Loop-out point adjust
5. RELOOP/EXIT button
5
6
3 4 5 6 7
25
6
7
8 9 10 11
12
13
14
15
16
17
18
19
20
21
22
24 23
6. Display
7. FOLDER SEARCH buttons (|, \)
During MP3 playback, layered CD-ROM folder search will be
performed in the designated direction.
8. CUE/LOOP CALL buttons (2, 3)
Use to call cue points and loop points recorded in external
memory (when memory card is loaded).
9. CUE/LOOP MEMORY button
Use to record cue points and loop points to external memory
(when memory card is loaded).
10. CUE/LOOP DELETE button
Use to delete cue points and loop points from external memory
(when memory card is loaded).
11. EJECT UNLOCK/LOCK switch
UNLOCK: Disc is ejected when button is pressed, even if
pressed during play.
LOCK: Disc cannot be ejected if button is pressed during play.
Set unit to pause mode and then press button to eject disc.
12. EJECT button (0)
When button is pressed, disc rotation stops and disc is ejected
from port.
If the EJECT UNLOCK/LOCK switch is set to the [LOCK]
position, the disc will not be ejected unless the unit is set to the
pause mode before pressing the EJECT button.
13. JOG ADJUST dial
Use to adjust the felt resistance (light/heavy) of the jog dial when
it is rotated.
CDJ-1000MK3
7
8
Rear Panel
37 38 36
39
Front Panel
41 42 43
8
A
B
40
C
D
44
E
F
113