Edit Peripheral - infinias S-IMS-A Intelli-M Installation And User Manual

SECTION 4: USER INTERFACE
32-Channel I/O Device configured for elevator control

4.10.2 Edit Peripheral

You can modify Peripherals using the Edit Peripheral Action. The Edit Peripheral Action is identical to the Create New
Peripheral Dialog, except that the custom configuration page for the specified Peripheral is visible.
To edit a Peripheral:
1. Select (highlight the peripheral you want edit.
2. Click the Edit Peripheral Action.
3. Make all necessary changes, then click Save or Update. Do not click Create (at the button at the bottom of the dialog).
4. When the configuration of the device is complete, the custom configuration interface will close. Click Cancel to close the
dialog.
Intelli-M Access V4.0 User Manual
85