infinias S-IMS-A Intelli-M Installation And User Manual page 90

SECTION 4: USER INTERFACE
Configure an Existing Device . To configure a device that was discovered or manually added, select the device in the
•
devices list in the left pane. A configuration page customized for that device will appear in the right pane with a Peripheral
Name for that device. If you selected a device that you created manually, you can modify the Name field to the way you want
the device to appear in Intelli-M Access. Click Create at the bottom of the window to create the peripheral.
If you select an automatically-discovered device that you didn't manually create, the device may not be configured for your
needs. Before you click Create, you must first configure the device using its custom configuration page shown in the right
NOTE
pane. Click Save or Update at the bottom of the custom configuration interface first. After you configured the device, select
the device again the left pane, then click Create at the bottom of the window to create the peripheral. Failure to do so may
create a Peripheral that doesn't match your needs. If this occurs, refer to the Edit Peripheral procedure below.
After clicking Create to create the peripheral, the device will disappear from the discovered devices list in the right pane and
will appear in the Content Area of the Peripherals Page. See below.
84
www.infinias.com
New Device menu