Create Rule - Event Management - infinias S-IMS-A Intelli-M Installation And User Manual

Configure Access Privilege rules in accordance with the following:
Select a Schedule . The Schedule specifies when the Rule is active. In other words, everywhere there is blue-colored blocks
•
in the Schedule you choose, access will be granted.
Select a Group. The Group represents the collection of People whose credentials you want to be granted access to the Zone
•
you will choose next.
Select a Zone. The Zone contains the Door(s) you wish the Group you selected to be given access.
•
Press the 'Create' button to create your new Access Privilege. The new Access Privilege will appear in the Access Privilege
•
section in the Content Area.
Access Privileges do not take effect until the Doors affected by the Access Privilege are updated on the Doors Configuration
NOTE
page. The Doors that are affected will have their Connection Status icon changed to a yellow triangle.

4.9.2 Create Rule - Event Management

The Event Management Rule makes an Event visible in the Events Page. By default, all Events are visible. You can reduce the number
of visible Events with this type of Rule. To filter out a single Event, you can also use the Hide Event Rule described below.
Create Rule dialog
Intelli-M Access V4.0 User Manual
SECTION 4: USER INTERFACE
77