infinias S-IMS-A Intelli-M Installation And User Manual page 16

SECTION 2: INSTALLATION
Many application installations affect the existing IIS configuration. Some applications change the name of the default IIS
website from "Default Web Site" to another name. Some might delete the default website altogether. In either case, the
application probably uses port 80 (and possibly port 443), preventing Intelli-M Access from using port 80. Other applications
disable IIS because they use a third-party web server like Apache. In all of these cases, you can still install Intelli-M Access on
this computer.
If "Default Web Site" has been changed or removed, you can either provide the new name to the Intelli-M Access
•
installer, or you can choose your own name and provide an unused port number (e.g. 8000 or 8080).
If IIS has been disabled, it was disabled so the third party web server could use port 80. In that case, change the port
•
number in the "Internet Services Information (IIS) Manager" utility to an unused port number (e.g. 8000 or 8080),
re-enable "Default Web Site", and provide the new port number to the Intelli-M Access installation.
Intelli-M Access requires SQL Server Standard/Enterprise 2008 R2 or SQL Server Express 2008 R2 with Advanced Services.
NOTE
Regardless of which Edition you have installed, you must configure SQL Server to allow Mixed Mode Authentication -
that is, SQL Server must allow both SQL Authentication and Windows Authentication. You can modify this configuration
property using SQL Management Studio.
You must have SQL Reporting Services installed. If you do not, the installation will succeed but the 'Reports' page will show
an error.
If you do not need the reports feature in Intelli-M Access, then you do not need to install the Reporting Services option in
•
SQL Server.
If you will be using the reports feature of Intelli-M Access, run your SQL Server installation again and add Reporting
•
Services to the installation. After that is complete, run the Intelli-M Access installation. If you have already installed
Intelli-M Access, simply run the Intelli-M Access installation again and choose the 'Repair' option.
b. A Custom Setup window will open showing the installation components whose installation options you can modify.
Click on each icon in the list to change how the feature is installed, then click Next.
For example, If you already have SQL Server 2008 R2 installed, then click the icon to the left of the SQL Server entry, and
choose Will not be installed, and click Next.
If you do not have SQL Server installed, and chose Custom to modify the Intelli-M Access website name, than make no
changes and simply click Next to continue.
10
www.infinias.com