Change The Admin Password - infinias S-IMS-A Intelli-M Installation And User Manual

SECTION 3: CONFIGURE INTELLI-M ACCESS
c. Place the Person in a Group. Click the arrow in the Groups tab (or drag and drop) to add membership to the selected
Group, which is already visible below the Card Code boxes. Initially, there is one group: Everyone. If several groups were
created, you can easily find a Group name in a long list of Groups by clicking the mouse anywhere in the Available
Group' window area and start typing the name of the Group. The Group whose name most closely matches what you
type will be automatically selected.
d. Configure PIN code. If some access controllers require a PIN, you can specify the PIN number in the Badge tab submenu.
In the example below, the PIN number 3210 was entered for the Card Code 1212123.
e. Modify other fields in the menu as needed. Click the tabs in the lower in the lower part of the menu to enter other
personal information including a pin code (Badge), username and password (Role).
3. Repeat these steps for each Person you wish to create. Each time you create or update a Person or their profile, the information
will be automatically sent to each Door.
If you see a rippled red line in a field, hover the cursor over that field and a message will appear explaining the problem.
NOTE
Correct the problem and try again.

3.6.1 Change the Admin password

To improve the security of your system (and facility), it is strongly recommended that the admin user password be changed from its
default (admin). The admin password is specified in the "admin" user dialog.
To change the admin password:
36
www.infinias.com
PIN code (four numbers)